Made_in_USA_small
 		 
  HENRY REPEATING ARMS
                          
                         A quick guide to Henry Rifles!
Henry Repeating Arms builds beautiful, accurate, reliable, and endearing rifles.
Like eating potato chips, most Henry Owners can't own "just one"! 
    Currently there are 9 basic models offered on the HENRY WEBSITE.
              It is important to know WHICH Henry Rifle you own.  
Correct model identity is the first step to proper sight selection. The model # would be shown on the box label if you purchased the gun new or you can identify it from photos and info HERE  >  HENRY RIFLE MODELS
Its important to note that Henry has 3 sizes of BRASS STYLE RECEIVER rifles.  (THESE ARE BEAUTIFUL!)
Rimfire Rifles with BRASSLITE receivers are "GOLDEN BOY'S"
Centerfire PISTOL CALIBER Rifles with BRASS receivers are
 "BIG BOY'S"
Centerfire PISTOL CALIBER Rifles with STEEL receivers are also 
"BIG BOYS"  H012
Centerfire RIFLE CALIBER Rifles with BRASS receivers are
 30-30's/45-70's  Henry also makes the 30-30's/45-70's in STEEL
H009/H010/H024

The NEW "LONG RANGER" H014 is chambered in 308/243/223

HENRY SINGLE SHOT RIFLE SIGHTS ARE LOCATED ON OUR H&R/NEF HANDI RIFLE PAGE
 
All BLACK receiver RIMFIRE rifles are very similar in choices.  (H001 and H003)  The differences are Round Barrel or Octagon Barrel.  Descriptions below outline which SKINNER SIGHT works with each option. 
 
NOTE: There are variations of each Henry Model but the Skinner Sight choices will be basically the same for all variations of the same # model.
FRONT SIGHT SELECTIONS ARE LISTED IF WE HAVE AN IDEA WHAT "MIGHT" WORK WITH YOUR RIFLE.  
 
(If no front sight suggestion is listed here then all standard front sight selection process applies.  "Install the new Skinner Sight, using the factory front sight, shoot on paper at a known distance, use the results to make front sight changes IF needed)
PLEASE SEE OUR FAQ PAGE FOR MORE FRONT SIGHT DETAILS.
 

 

SNC16326Henry Repeating Arms has been making beautiful leverguns for many years.

In a Letter from 
Anthony Imperato
(President of HRA)
he says this about
SKINNER SIGHTS.



"We already recommend on a daily basis your peep sight that fits in the dovetail slot."

                     ALL SKINNER SIGHTS HAVE
      FULL WINDAGE AND ELEVATION ADJUSTMENT
             (except the LoPro which has elevation adjustment only)

BARREL MOUNTED DOVETAIL SIGHT

This sight works well on any Henry rifle with a 3/8" Dovetail

These photos were taken by a customer who wrote:

SNC16315[1]

"Hey Andy, I finally  had the chance to install your sights on my Henry Golden Boy and Big Boy.   I took them to the range this past weekend and am thoroughly enjoying 
the enhanced focus." 
 

            
               
   (Shown here on a Henry "Big Boy")

 "I cant tell you how happy I am with these sights,they look fantastic!"
 

SNC16316[1]


THESE SIGHTS WORK!

With a barrel mounted peep sight you don't need  to worry about where the front sight is in the " notch".  Just look through the aperture and put the front sight on the target.


   
     


        (Shown here on a Henry "GOLDEN BOY")
 
                                       Available in
                    Blue $48  ~  Brass $49

Material

   The Barrel mount "usually" works with the factory front sight.

For the Henry rifles that are drilled and tapped 
under the factory barrel mounted sight
(Please look under the factory rear sight)

 (This is for octagon barreled rifles)

#H004 ~ Golden Boy's and #H001T ~ Frontier's
 
we offer the

Skinner "HENRY OCTAGON SCREW MOUNT" sight.

HOSM_B


This sight uses the factory drilled holes on the barrel flat just forward of the
receiver on the Henry Octagon rifles.

(Your will find the holes UNDER
the factory rear sight) 

Supplied with mounting screws and hex wrenches for installation.



BLUE ~  $75   BRASS ~ $90   BLACK GOLD (or silver) ~ $95                  and SKINNER GOLD ~ $100 (pictured below)  

HOSM
 

Shown here in "BLACK GOLD" (optional)
(Also available in "BLACK SILVER" for the EVIL ROY and other Silver colored receivers)
Be sure to order a DOVETAIL SLOT BLANK to fill the slot left when you remove your rear sight)

This sight generally requires a taller front sight.  No promises (please see our FAQ page) but our 3/8"X.600" Front Sight or .570" Fiber Optic are good places to start.

(Sight is .420" from top of barrel to center of aperture)

(Ships with a .125" aperture installed)

(Note:  WHEN MOUNTED ON THE HENRY GOLDENBOY, THIS SIGHT DOES NOT WORK WELL WITH THE MERIT ADJ. APERTURE)

FULLY WINDAGE AND  ELEVATION ADJUSTABLE

   The Skinner OCTAGON BARREL SCREW MOUNT Sight
                                  (Identical to the sight above except for color/material)
                    is also available in SKINNER "GOLD"

Gold_Henry
Something about GOLD looks
amazing on Henry Rifles.  This 
"contrast" will look fantastic
 when mounted on the barrel of
your  Brass Framed Henry!


                                       $100 as pictured
      PLEASE ORDER USING THE DROP BOX ABOVE
  
THE Skinner "RIMFIRE" Groove Sight
Henry_22















Skinner "BLACK GOLD" Option (Shown)
 
This sight looks GREAT on your .22 and 17 HMR Henry Rifles (#H001 MODELS WITH GROOVES ON TOP OF THE RECEIVER.)  
 
               Fully Elevation and Windage  Adjustable
                                  
             BLUE ~ $80  BLACK GOLD ~ $100
Henry Rimfire
 
                                      
Mounting Instructions:  Remove your existing barrel mounted rear sight (using a brass punch ) and replace it with a dovetail blank.  On octagon barreled models there may be two threaded holes underneath the factory rear sight.  Fill those holes with two 8-40 Fill Screws. 

Loosen the rear "pinch" screw on the Skinner RIMFIRE sight and slide it carefully onto the top receiver "GROOVES" from the rear of the receiver.  Set in desired position and tighten the rear "pinch" screw enough to keep the sight from sliding.

Adjust windage by loosening the top set screw and gently tapping (wooden dowel or brass punch) right and left.  Once proper windage has been achieved, re-tighten the set screw.

Elevation is adjusted by loosening the set screw on the right side and threading the aperture stem up and down in 1/2 turn increments.  Re-tighten set screw.

You will most likely need a taller Front Sight. 
 
For round barrel rifles see our front sight/ramp/barrel band combo dovetailing service listed below.

On RIMFIRE Octagonal barrel models, use one of our 3/8" X .600" barrel mounted front sight and "trim" to the exact height you need while actually shooting on paper.  Touch up with Skinner BLUE and you are ready to go!  

H001_50_ft

                                                 NEW

     For the Henry Models H001 and H003

H001_Cover

SKINNER SIGHTS is now offering a SLIM, TRIM, AND BEAUTIFUL sight for  the HENRY H001 and H003 series Rimfire rifles.  This sight requires drilling and tapping two 8-40 holes in the receiver cover.

Fully Adjustable for windage and elevation, this sight sits .080" lower than our RIMFIRE Groove mounted sight.  Consequently there is a good chance (cannot guarantee for the reasons listed on our FAQ page) that it will work with your factory front sight. 

             SKINNER H001 Receiver Sight in Blue Steel  ~  $55

Material


HENRY REPEATING ARMS  OFFERS OUR H001 SIGHT OEM INSTALLED ON A  COUPLE H001 MODELS. (Small Game Carbine and Rifle)
 
Mounting screws and wrenches included.
 Sight ships with a .096" aperture installed

SIGHT USES 8-40 SCREWS LOCATED 1" C-C.  THE FRONT SCREW IS LOCATED 2.75" FROM THE FRONT OF THE RECEIVER COVER EDGE.  THE REAR SCREW IS LOCATED EXACTLY 1" (@ 3.75") FURTHER TO THE REAR, BOTH SCREWS DRILLED EXACTLY ON THE CENTERLINE OF THE TOP RIB.   #29 drill / 8-40 Tap
 
SPECIAL OFFER
For $80 we will drill, tap, and install our H001 rear sight on your rifles receiver cover.  

                       
                       Sight included.  $10  for return shipping

         This service is Not available for international customers

H004_AE






 

                If you want to add a receiver sight to your

        #H004 GOLDEN BOY, 

 consider our Skinner Sights

                    GOLDEN BOY "EXPRESS"

   (The GOLDEN BOY is a RIMFIRE CALIBER.  If you have a CENTERFIRE caliber rifle, please see our BIG BOY "EXPRESS" or 45-70/30-30 EXPRESS sights  listed below)

   This sight requires our "Drill and Tap" service as described below.

   Fully adjustable for windage and elevation.

   Ships with a .096" aperture, wrenches and mounting screws.

  We think the contrast it brings to the rifle looks AMAZING.

                                          Available in:

   ALL BLUE ~ $90   ALL BRASS ~ $95  and  BLACK GOLD ~$110

THIS IS FOR THE RIMFIRE CARTRIDGE GOLDEN BOY.  

SCREW SIZE IS 6-48 for the Golden Boy EXPRESS

FLAVOR


FOR THE BIG BOY RIFLES (Centerfire Pistol Calibers) PLEASE SCROLL FURTHER DOWN TO THE BIG BOY EXPRESS.

We recommend shooting on paper with your new EXPRESS sight prior to making a front sight change.  Using the results, front sight selection is much easier. 

We provide a "Drill and Tap" service for your
existing Receiver Cover. 

 $35 (drill and tap only) plus $10 Return Shipping and handling

 This service is NOT available for international customers

For those who wish to drill and tap their own receiver cover we offer
DRILL AND TAP KITS HERE

Directions for Cover Removal:

HENRY HELPFUL VIDEOS HERE   <<< Henry Maintenance Videos

1.  Check to make sure the rifle and magazine are unloaded and pointed in a safe direction.

2.  Remove the rear tang screw allowing butt stock removal. 

3.  Remove the four large headed screws on each side of the receiver cover.  (Always use a carefully fitted screwdriver tip and be extra careful to not scratch the receiver finish)

4.  Cock the hammer. 

5.  Lift the cover up and to the rear, sliding it off of the rifle.

6.  Carefully wrap the receiver in a padded wrap and ship using a cardboard box.  (We use a USPS  shipping box)

7.  Send it to:

         Skinner Sights LLC, P.O. Box 1810, St. Ignatius, MT  59865

      (Please include a check or money order with the receiver cover.)

            HENRY 30-30 and 45-70 Rifles
                                   #H009 and #H010

     We offer FOUR sights for the Henry Large Frame Rifles.
   which will fit the drilled and tapped receiver mounting holes.
               (Any of our Marlin 336/1895 rear sights will fit)    

               Our most popular Henry Large Frame sight is the 
                SKINNER "EXPRESS"

Express_3These beautiful sights blend the lines on top of your rifle.

 As one customer reports,

The Skinner Sights look
   like they GREW in 
      place, not like a 
  BLISTER on my gun"                                                                                           Available in
 Blued $90   -   Brass $95   -  Stainless $100  -  Black Gold  $110
Choose Material
Shipped with a .096" aperture installed.  All Mounting Screws and Wrenches are included.  Windage and Elevation Adjustable.
For Octagon barrel models we recommend our 1/2"X.650" front sight (and trim to exact height as needed) or our .570" tall Fiber Optic front sight.  
Round Barrel Models with the "White Stripe" front sight generally work with the factory front sight.  Please see our FAQ page for more details.
          For more "CLASS" the Skinner "ALASKAN"
         will look AMAZING on your Beautiful Henry Rifle.
            (30-30 and 45-70 both Brass and Steel Receiver)

Henry_Alaskan














                                         Available in  

Skinner "BLACK GOLD"   ~   $135

Skinner "GOLD"                  ~   $135

"STAINLESS"                      ~   $135

"ALL BLUE/BLACK"         ~   $125

Choose Material

Shipped with a .096" aperture installed.  Adjustment wrenches and mounting screws included.  Fully elevation and windage adjustable.
 

For Octagon barrel models we recommend our 1/2"X.650" front sight (and trim to exact height as needed) or our .570" tall Fiber Optic front sight.  
Round Barrel Models with the "White Stripe" front sight generally work with the factory front sight.  Please see our FAQ page for more details.
SKINNER "HENRY" 30-30 / 45-70 
EXPRESS SCOPE MOUNT
(ALSO AVAILABLE FOR THE  BIG BOY RIFLES)
(Includes SIDE GATE models)
 
Want the best of both worlds???
Henry_SM_Express














PLEASE SEE OUR SCOPE MOUNT PAGE TO ORDER
 
H010AWSKINEXPSMe





























The new Henry H010AW All Weather rifles are AMAZING.
The fit and finish of this rifle is great, the action smooth, accuracy spot on.  
The black stock is not painted but rather a deep dark black stain that shows the wood
 grain nicely.  Our friends at HENRY RIFLES hit another HOME RUN with this one!
 
   

FOR YOUR H009/H010/H024 RIFLES ALSO SEE OUR "RELIABLE" and "WINGED" Sights
 (Click on these links.  Same as our Marlin 1895/336 Sights)

For the H006 and H012 BIG BOY rifles
order the Marlin 1894 Winged Sights.

94_Tac_D
Our standard EXPRESS and RELIABLE sights are durable enough to not need wings for protection.  However, there are those who like "WINGS" and we build this sight for those who do.

Fully elevation and windage adjustable

 
_____________________________________________________________
 
 IF YOU HAVE A
 HENRY "BIG BOY" RIFLE
 #H006 (Brass)  and #H012 (Steel)
 THIS IS THE SIGHT FOR YOU
(This is THE sight for the Henry "BIG BOY" Rifle)

Skinner "BIG BOY" Express
                        
(Fits the Henry Big Boy Rifles)
Includes Side Gate Models
What do our Customers say?
 
"THANK YOU FOR THE TIME AND QUALITY YOU PUT INTO YOUR SIGHTS.
WORKS PERFECTLY!  VERY ACCURATE  WITH LITTLE  REQUIRED 
ADJUSTING. MINUTE OF MILK JUG  AT  200 YDS.   DEAD CENTER, NO PROBLEM!"


      Mike   (Email dated 5-12-2015)

bbe_bg_WP
 















NO GUNSMITHING REQUIRED

         (THIS SIGHT FITS THE FACTORY DRILLED AND TAPPED HOLES)

SteelBigBoyExpress


















Available in BLUE, Solid BRASS,  and of course our
famous "BLACK GOLD" (As shown)

NOW AVAILABLE IN SOLID STAINLESS FOR THE ALL WEATHER RIFLES  NO PHOTO AVAILABLE AT THIS TIME.  JUST IMAGINE A STAINLESS SIGHT ON TOP OF THE AW RECEIVER.  (They are beautiful)

Henry BIG BOY EXPRESS

    BLUED $90  -   BRASS $95  -  "BLACK GOLD" $110
STAINLESS STEEL $100

Front Sight selection is always best made after installing the rear sight and shooting on paper at a known distance.  Customers report about 50% success using the factory front sight.

          Mounting Screws / Wrenches / and Instructions are included.

        Sight is designed to fit the factory drilled and tapped holes.

If we are asked, we will "suggest" our 1/2"x.650" front (and trim to exact height as needed) or our .570" tall Fiber Optic front sight.  These are just suggestions.  Please see our FAQ page for more information.  It is our understanding that some of the Henry Big Boy Steel frame models have a .570" factory front sight.   For those rifles, if a taller sight is needed our .650" tall Patridge blade would be our "suggestion".
 

 

Henry "LONG RANGER" Rifle
Model H014

Henry has come out with a totally new rifle chambered in longer range calibers like 308 Winchester / 243 Winchester / and 223 Remington
LR1

Skinner Sights has three models of Aperture Sights  and scope mounts available for this rifle.  All three are designed to fit the factory drilled and tapped holes on top of the receiver. 

All 3 are Windage and Elevation Adjustable
Ships with a .096" Aperture installed
(Five sizes of APERTURES available)

The Skinner "EXPRESS"  (Shown)
Blue Steel ~ $90         Brass ~ $95        "BLACK GOLD" ~ $110
(Pictured here in Brass for contrast)

Henry EXP Long Ranger BRASS $95.00 USD
Henry EXP Long Ranger BLACK GOLD $110.00 USD


The Skinner "ALASKAN"
(Photo to come, longer, sleeker, like our other ALASKAN sights)

Blue Steel ~ $125         Brass ~ $135        "BLACK GOLD" ~ $135

SKINNER GOLD $135.00 USD
BLUE $125.00 USD
FLAVOR

The Skinner "EXPRESS" Scope Mount with Integral Peep
(Photo to come, looks like our other EXPRESS scope mounts)
Please see our SCOPE MOUNTS page

Blue  Steel ~ $149        "BLACK GOLD" ~ $169

These sights are part of our regular production and ready to ship. 

BLACK GOLD $169.00 USD
FLAVOR
 HENRY FRONT SIGHT/BARREL BAND MODIFICATION

H001_Front_DT
If you have tried adding a receiver sight (or needed a different front sight) to a Henry Repeating Arms Rimfire, 30-30 or 45/70 round barrel lever action rifle, you may have discovered that the one piece sight/ramp/barrel band combo leaves very few options for a change.

Skinner Sights offers a modification to the STEEL (not the former plastic) front sight/ramp/band combos that will allow mounting the front sight of your choice.

We will dovetail the sight ramp with a standard 3/8" dovetail and Hot Blue the assembly for $25.  If you want a Skinner Patridge Front sight installed, we can do that also and ship it back to you assembled.

Send me the Sight/Ramp/Band Assembly and a check for the $25 plus $7 return shipping and allow two weeks turn around time. Be sure to pack it well and include the mounting screws. 

Blue_Fronts_1Brs_Fronts_1








         (For a fitted Skinner Patridge front sight add $20 for Blue and $22 for Brass)

(Front sight hood will still fit with this modification but the distance
from the top of a taller front sight to the hood will of course be smaller)
H001_W-Hood
     Send to:

     SKINNER SIGHTS
     Attn: Andy
     P.O. Box 1810
     St. Ignatius, MT 59865
 

The Mini SHOT Reflex RED DOT Sight

Henry_MS_1
















Using our SIMPLE, LOW, SPECIAL MOUNT, this RED DOT
Reflex sight is a great companion to your SKINNER PEEP SIGHT

This sight will fit the:

~ HENRY FRONTIER  #H001T (and variants)
~ HENRY PUMP          #H003
~ GOLDEN BOY          #H004 
~ 30-30 OCTAGON      #H009B
   ~ The BIG BOY            #H006    

(when used as a primary rear sight  or in conjunction with a SKINNER BARREL MOUNT Sight.)  

You can remove the sight in the field and re-install without special tools. 
The base is low enough to use the SKINNER SIGHTS
when the Red Dot is removed.

   ~ CLICK HERE ~
                HENRY Model 1860 Repeating Rifles  #H011
  (And reproductions made by Uberti and imported by
                                                       Navy Arms and Taylor Arms.)
1860_Henry

 

This sight mounts in the existing factory dovetail with no modifications to the firearm.  The aperture is bright and clear to the eye.  We supply this sight with a .155" (X Large) peep to accommodate the wide factory front sight of the 1860 Rifle.


1860_Henry_3
I have been shooting this exact sight (as pictured) on my own 1860 Henry Rifle (44-40) and accuracy is amazing!  The sight picture is quick to acquire.  Just look through the peep and focus on the front sight.  Machined from solid 360 brass bar stock this sight looks like it could have been installed during the Civil War.  (If Skinner Sights had been present during that era, we would have made sure they were!)

                                   Available only in Brass.

                               $50 each
Material

Ships with .155" aperture installed.  Fully adjustable for windage and elevation.  Mounting Instructions and adjusting wrenches included.

         WE DO NOT MAKE A FRONT SIGHT FOR THIS RIFLE AT THIS TIME.

Each Skinner Sight features removable apertures. Apertures_E_cApertures_E

"







CLICK HERE TO ORDER EXTRA APERTURES.

Be sure to check our SPECIAL ITEMS page
for other products that can enhance your 
shooting experience and help you achieve
SUCCESS!

Skinner "BLACK GOLD"
can be added to our  blue Skinner sights with windage dovetails for just the right amount of "Class" to match your beautiful rifle. 
Black_Gold 
Apply BLACK GOLD to your order on our
SPECIAL ITEMS   page.

    BLUED $90  -   BRASS $95  -  "BLACK GOLD" $110
STAINLESS STEEL $100

Front Sight selection is always best made after installing the rear sight and shooting on paper at a known distance.  Customers report about 50% success using the factory front sight.

          Mounting Screws / Wrenches / and Instructions are included.

        Sight is designed to fit the factory drilled and tapped holes.

If we are asked, we will "suggest" our 1/2"x.650" front (and trim to exact height as needed) or our .570" tall Fiber Optic front sight.  These are just suggestions.  Please see our FAQ page for more information.  It is our understanding that some of the Henry Big Boy Steel frame models have a .570" factory front sight.   For those rifles, if a taller sight is needed our .650" tall Patridge blade would be our "suggestion".
_____________________________________________________________
 

Henry "LONG RANGER" Rifle
Model H014

Henry has come out with a totally new rifle chambered in longer range calibers like 308 Winchester / 243 Winchester / and 223 Remington
LR1

Skinner Sights has three models of Aperture Sights  and scope mounts available for this rifle.  All three are designed to fit the factory drilled and tapped holes on top of the receiver. 

All 3 are Windage and Elevation Adjustable
Ships with a .096" Aperture installed
(Five sizes of APERTURES available)

The Skinner "EXPRESS"  (Shown)
Blue Steel ~ $90         Brass ~ $95        "BLACK GOLD" ~ $110
(Pictured here in Brass for contrast)

Henry EXP Long Ranger BRASS $95.00 USD
Henry EXP Long Ranger BLACK GOLD $110.00 USD
Choose Material

The Skinner "ALASKAN"
(Photo to come, longer, sleeker, like our other ALASKAN sights)

Blue Steel ~ $125         Brass ~ $135        "BLACK GOLD" ~ $135

SKINNER GOLD $135.00 USD
BLUE $125.00 USD
FLAVOR

The Skinner "EXPRESS" Scope Mount with Integral Peep
(Photo to come, looks like our other EXPRESS scope mounts)
Please see our SCOPE MOUNTS page

Blue  Steel ~ $149        "BLACK GOLD" ~ $169

These sights are part of our regular production and ready to ship. 

BLACK GOLD $169.00 USD
FLAVOR
 HENRY FRONT SIGHT/BARREL BAND MODIFICATION

H001_Front_DT
If you have tried adding a receiver sight (or needed a different front sight) to a Henry Repeating Arms Rimfire, 30-30 or 45/70 round barrel lever action rifle, you may have discovered that the one piece sight/ramp/barrel band combo leaves very few options for a change.

Skinner Sights offers a modification to the STEEL (not the former plastic) front sight/ramp/band combos that will allow mounting the front sight of your choice.

We will dovetail the sight ramp with a standard 3/8" dovetail and Hot Blue the assembly for $25.  If you want a Skinner Patridge Front sight installed, we can do that also and ship it back to you assembled.

Send me the Sight/Ramp/Band Assembly and a check for the $25 plus $7 return shipping and allow two weeks turn around time. Be sure to pack it well and include the mounting screws. 

Blue_Fronts_1Brs_Fronts_1








         (For a fitted Skinner Patridge front sight add $20 for Blue and $22 for Brass)

(Front sight hood will still fit with this modification but the distance
from the top of a taller front sight to the hood will of course be smaller)
H001_W-Hood
     Send to:

     SKINNER SIGHTS
     Attn: Andy
     P.O. Box 1810
     St. Ignatius, MT 59865
 

The Mini SHOT Reflex RED DOT Sight

Henry_MS_1
















Using our SIMPLE, LOW, SPECIAL MOUNT, this RED DOT
Reflex sight is a great companion to your SKINNER PEEP SIGHT

This sight will fit the:

~ HENRY FRONTIER  #H001T (and variants)
~ HENRY PUMP          #H003
~ GOLDEN BOY          #H004 
~ 30-30 OCTAGON      #H009B
   ~ The BIG BOY            #H006    

(when used as a primary rear sight  or in conjunction with a SKINNER BARREL MOUNT Sight.)  

You can remove the sight in the field and re-install without special tools. 
The base is low enough to use the SKINNER SIGHTS
when the Red Dot is removed.

   ~ CLICK HERE ~
                HENRY Model 1860 Repeating Rifles  #H011
  (And reproductions made by Uberti and imported by
                                                       Navy Arms and Taylor Arms.)
1860_Henry

 

This sight mounts in the existing factory dovetail with no modifications to the firearm.  The aperture is bright and clear to the eye.  We supply this sight with a .155" (X Large) peep to accommodate the wide factory front sight of the 1860 Rifle.


1860_Henry_3
I have been shooting this exact sight (as pictured) on my own 1860 Henry Rifle (44-40) and accuracy is amazing!  The sight picture is quick to acquire.  Just look through the peep and focus on the front sight.  Machined from solid 360 brass bar stock this sight looks like it could have been installed during the Civil War.  (If Skinner Sights had been present during that era, we would have made sure they were!)

                                   Available only in Brass.

                               $50 each
Material

Ships with .155" aperture installed.  Fully adjustable for windage and elevation.  Mounting Instructions and adjusting wrenches included.

         WE DO NOT MAKE A FRONT SIGHT FOR THIS RIFLE AT THIS TIME.

Each Skinner Sight features removable apertures. Apertures_E_cApertures_E

"







CLICK HERE TO ORDER EXTRA APERTURES.

Be sure to check our SPECIAL ITEMS page
for other products that can enhance your 
shooting experience and help you achieve
SUCCESS!

Skinner "BLACK GOLD"
can be added to our  blue Skinner sights with windage dovetails for just the right amount of "Class" to match your beautiful rifle. 
Black_Gold 
Apply BLACK GOLD to your order on our
SPECIAL ITEMS   page.

    BLUED $90  -   BRASS $95  -  "BLACK GOLD" $110
STAINLESS STEEL $100

Front Sight selection is always best made after installing the rear sight and shooting on paper at a known distance.  Customers report about 50% success using the factory front sight.

          Mounting Screws / Wrenches / and Instructions are included.

        Sight is designed to fit the factory drilled and tapped holes.

If we are asked, we will "suggest" our 1/2"x.650" front (and trim to exact height as needed) or our .570" tall Fiber Optic front sight.  These are just suggestions.  Please see our FAQ page for more information.  It is our understanding that some of the Henry Big Boy Steel frame models have a .570" factory front sight.   For those rifles, if a taller sight is needed our .650" tall Patridge blade would be our "suggestion".
_____________________________________________________________
 

Henry "LONG RANGER" Rifle
Model H014

Henry has come out with a totally new rifle chambered in longer range calibers like 308 Winchester / 243 Winchester / and 223 Remington
LR1

Skinner Sights has three models of Aperture Sights  and scope mounts available for this rifle.  All three are designed to fit the factory drilled and tapped holes on top of the receiver. 

All 3 are Windage and Elevation Adjustable
Ships with a .096" Aperture installed
(Five sizes of APERTURES available)

The Skinner "EXPRESS"  (Shown)
Blue Steel ~ $90         Brass ~ $95        "BLACK GOLD" ~ $110
(Pictured here in Brass for contrast)

Henry EXP Long Ranger BRASS $95.00 USD
Henry EXP Long Ranger BLACK GOLD $110.00 USD
Choose Material

The Skinner "ALASKAN"
(Photo to come, longer, sleeker, like our other ALASKAN sights)

Blue Steel ~ $125         Brass ~ $135        "BLACK GOLD" ~ $135

SKINNER GOLD $135.00 USD
BLUE $125.00 USD
FLAVOR

The Skinner "EXPRESS" Scope Mount with Integral Peep
(Photo to come, looks like our other EXPRESS scope mounts)
Please see our SCOPE MOUNTS page

Blue  Steel ~ $149        "BLACK GOLD" ~ $169

These sights are part of our regular production and ready to ship. 

BLACK GOLD $169.00 USD
FLAVOR
 HENRY FRONT SIGHT/BARREL BAND MODIFICATION

H001_Front_DT
If you have tried adding a receiver sight (or needed a different front sight) to a Henry Repeating Arms Rimfire, 30-30 or 45/70 round barrel lever action rifle, you may have discovered that the one piece sight/ramp/barrel band combo leaves very few options for a change.

Skinner Sights offers a modification to the STEEL (not the former plastic) front sight/ramp/band combos that will allow mounting the front sight of your choice.

We will dovetail the sight ramp with a standard 3/8" dovetail and Hot Blue the assembly for $25.  If you want a Skinner Patridge Front sight installed, we can do that also and ship it back to you assembled.

Send me the Sight/Ramp/Band Assembly and a check for the $25 plus $7 return shipping and allow two weeks turn around time. Be sure to pack it well and include the mounting screws. 

Blue_Fronts_1Brs_Fronts_1








         (For a fitted Skinner Patridge front sight add $20 for Blue and $22 for Brass)

(Front sight hood will still fit with this modification but the distance
from the top of a taller front sight to the hood will of course be smaller)
H001_W-Hood
     Send to:

     SKINNER SIGHTS
     Attn: Andy
     P.O. Box 1810
     St. Ignatius, MT 59865
 

The Mini SHOT Reflex RED DOT Sight

Henry_MS_1
















Using our SIMPLE, LOW, SPECIAL MOUNT, this RED DOT
Reflex sight is a great companion to your SKINNER PEEP SIGHT

This sight will fit the:

~ HENRY FRONTIER  #H001T (and variants)
~ HENRY PUMP          #H003
~ GOLDEN BOY          #H004 
~ 30-30 OCTAGON      #H009B
   ~ The BIG BOY            #H006    

(when used as a primary rear sight  or in conjunction with a SKINNER BARREL MOUNT Sight.)  

You can remove the sight in the field and re-install without special tools. 
The base is low enough to use the SKINNER SIGHTS
when the Red Dot is removed.

   ~ CLICK HERE ~
                HENRY Model 1860 Repeating Rifles  #H011
  (And reproductions made by Uberti and imported by
                                                       Navy Arms and Taylor Arms.)
1860_Henry

 

This sight mounts in the existing factory dovetail with no modifications to the firearm.  The aperture is bright and clear to the eye.  We supply this sight with a .155" (X Large) peep to accommodate the wide factory front sight of the 1860 Rifle.


1860_Henry_3
I have been shooting this exact sight (as pictured) on my own 1860 Henry Rifle (44-40) and accuracy is amazing!  The sight picture is quick to acquire.  Just look through the peep and focus on the front sight.  Machined from solid 360 brass bar stock this sight looks like it could have been installed during the Civil War.  (If Skinner Sights had been present during that era, we would have made sure they were!)

                                   Available only in Brass.

                               $50 each
Material

Ships with .155" aperture installed.  Fully adjustable for windage and elevation.  Mounting Instructions and adjusting wrenches included.

         WE DO NOT MAKE A FRONT SIGHT FOR THIS RIFLE AT THIS TIME.

Each Skinner Sight features removable apertures. Apertures_E_cApertures_E

"







CLICK HERE TO ORDER EXTRA APERTURES.

Be sure to check our SPECIAL ITEMS page
for other products that can enhance your 
shooting experience and help you achieve
SUCCESS!

Skinner "BLACK GOLD"
can be added to our  blue Skinner sights with windage dovetails for just the right amount of "Class" to match your beautiful rifle. 
Black_Gold 
Apply BLACK GOLD to your order on our
SPECIAL ITEMS   page.

    BLUED $90  -   BRASS $95  -  "BLACK GOLD" $110
STAINLESS STEEL $100

Front Sight selection is always best made after installing the rear sight and shooting on paper at a known distance.  Customers report about 50% success using the factory front sight.

          Mounting Screws / Wrenches / and Instructions are included.

        Sight is designed to fit the factory drilled and tapped holes.

If we are asked, we will "suggest" our 1/2"x.650" front (and trim to exact height as needed) or our .570" tall Fiber Optic front sight.  These are just suggestions.  Please see our FAQ page for more information.  It is our understanding that some of the Henry Big Boy Steel frame models have a .570" factory front sight.   For those rifles, if a taller sight is needed our .650" tall Patridge blade would be our "suggestion".
_____________________________________________________________
 

Henry "LONG RANGER" Rifle
Model H014

Henry has come out with a totally new rifle chambered in longer range calibers like 308 Winchester / 243 Winchester / and 223 Remington
LR1

Skinner Sights has three models of Aperture Sights  and scope mounts available for this rifle.  All three are designed to fit the factory drilled and tapped holes on top of the receiver. 

All 3 are Windage and Elevation Adjustable
Ships with a .096" Aperture installed
(Five sizes of APERTURES available)

The Skinner "EXPRESS"  (Shown)
Blue Steel ~ $90         Brass ~ $95        "BLACK GOLD" ~ $110
(Pictured here in Brass for contrast)

Henry EXP Long Ranger BRASS $95.00 USD
Henry EXP Long Ranger BLACK GOLD $110.00 USD
Choose Material

The Skinner "ALASKAN"
(Photo to come, longer, sleeker, like our other ALASKAN sights)

Blue Steel ~ $125         Brass ~ $135        "BLACK GOLD" ~ $135

SKINNER GOLD $135.00 USD
BLUE $125.00 USD
FLAVOR

The Skinner "EXPRESS" Scope Mount with Integral Peep
(Photo to come, looks like our other EXPRESS scope mounts)
Please see our SCOPE MOUNTS page

Blue  Steel ~ $149        "BLACK GOLD" ~ $169

These sights are part of our regular production and ready to ship. 

BLACK GOLD $169.00 USD
FLAVOR
 HENRY FRONT SIGHT/BARREL BAND MODIFICATION

H001_Front_DT
If you have tried adding a receiver sight (or needed a different front sight) to a Henry Repeating Arms Rimfire, 30-30 or 45/70 round barrel lever action rifle, you may have discovered that the one piece sight/ramp/barrel band combo leaves very few options for a change.

Skinner Sights offers a modification to the STEEL (not the former plastic) front sight/ramp/band combos that will allow mounting the front sight of your choice.

We will dovetail the sight ramp with a standard 3/8" dovetail and Hot Blue the assembly for $25.  If you want a Skinner Patridge Front sight installed, we can do that also and ship it back to you assembled.

Send me the Sight/Ramp/Band Assembly and a check for the $25 plus $7 return shipping and allow two weeks turn around time. Be sure to pack it well and include the mounting screws. 

Blue_Fronts_1Brs_Fronts_1








         (For a fitted Skinner Patridge front sight add $20 for Blue and $22 for Brass)

(Front sight hood will still fit with this modification but the distance
from the top of a taller front sight to the hood will of course be smaller)
H001_W-Hood
     Send to:

     SKINNER SIGHTS
     Attn: Andy
     P.O. Box 1810
     St. Ignatius, MT 59865
 

The Mini SHOT Reflex RED DOT Sight

Henry_MS_1
















Using our SIMPLE, LOW, SPECIAL MOUNT, this RED DOT
Reflex sight is a great companion to your SKINNER PEEP SIGHT

This sight will fit the:

~ HENRY FRONTIER  #H001T (and variants)
~ HENRY PUMP          #H003
~ GOLDEN BOY          #H004 
~ 30-30 OCTAGON      #H009B
   ~ The BIG BOY            #H006    

(when used as a primary rear sight  or in conjunction with a SKINNER BARREL MOUNT Sight.)  

You can remove the sight in the field and re-install without special tools. 
The base is low enough to use the SKINNER SIGHTS
when the Red Dot is removed.

   ~ CLICK HERE ~
                HENRY Model 1860 Repeating Rifles  #H011
  (And reproductions made by Uberti and imported by
                                                       Navy Arms and Taylor Arms.)
1860_Henry

 

This sight mounts in the existing factory dovetail with no modifications to the firearm.  The aperture is bright and clear to the eye.  We supply this sight with a .155" (X Large) peep to accommodate the wide factory front sight of the 1860 Rifle.


1860_Henry_3
I have been shooting this exact sight (as pictured) on my own 1860 Henry Rifle (44-40) and accuracy is amazing!  The sight picture is quick to acquire.  Just look through the peep and focus on the front sight.  Machined from solid 360 brass bar stock this sight looks like it could have been installed during the Civil War.  (If Skinner Sights had been present during that era, we would have made sure they were!)

                                   Available only in Brass.

                               $50 each
Material

Ships with .155" aperture installed.  Fully adjustable for windage and elevation.  Mounting Instructions and adjusting wrenches included.

         WE DO NOT MAKE A FRONT SIGHT FOR THIS RIFLE AT THIS TIME.

Each Skinner Sight features removable apertures. Apertures_E_cApertures_E

"







CLICK HERE TO ORDER EXTRA APERTURES.

Be sure to check our SPECIAL ITEMS page
for other products that can enhance your 
shooting experience and help you achieve
SUCCESS!

Skinner "BLACK GOLD"
can be added to our  blue Skinner sights with windage dovetails for just the right amount of "Class" to match your beautiful rifle. 
Black_Gold 
Apply BLACK GOLD to your order on our
SPECIAL ITEMS   page.

 

Copyright 2013-2016 Skinner Sights LLC / Andy Larsson - All Rights Reserved

  Site Map