Marlin 1895 & 336 Sights
Fits the Model 1895, 336, 444, 375, 356 ER and all large
frame models of Marlin lever action rifles.
(including the Marlin Guide Gun and MXRL series)
CAMP CARBINES USE THE SAME SIGHTS AS THE 1895/336
FUN FACT!!! All Skinner Sights Marlin 1895/336 Models will fit the HENRY "Large Frame" (Rifle Calibers, 45-70 / 38-55 / 35 Rem / 30-30) rifles. They have the same receiver profiles and hole spacings.
The sight is designed to mount useing the rear pre-drilled and tapped holes on the top of the receiver. It is adjustable for windage and elevation and adjustments are locked in place with set screws.
This sight is precision manufactured from SOLID BARSTOCK to close tolerances and can be ordered in:
Blued Steel ~ Stainless Steel ~ Brass.
The included .096" aperture allows the marksman to use a fine aperture or remove it for a .200" ghost ring. Other aperture sizes are available, please see our APERTURES page on the side bar.
Instructions, mounting screws and wrenchs are included..
Please see our Frequently Asked Questions page for information on
Will this sight work with my factory Front Sight?
ORDER MOST SIGHTS ON THIS PAGE WITH THIS CART BUTTON
Blued Steel
Stainless Steel
Brass
Note: These are early photos of the "Reliable" sights. Our current sight is slightly more streamlined and has "Skinner" engraved on top.
OUR XA SERIES 1895 / 336 SIGHT
XA = Extra aperture. This sight has a threaded hole in the forward "slope"
of the sight that allows an extra aperture to be easily stored and available for
those "changing light" conditions.
The XA comes standard with your choice of two aperture sizes.
(Please leave a note to merchant during final checkout or send an email immediately following placing the order letting us know which two you would like included)
(Sm, Med, Std, Lrg, Xlrg)
Price is: $82 Blue ~ $85 Brass ~ $88 Stainless.
THE GUIDE GUN SET
In response to YOUR needs, Marlin brought out the incredible
GUIDE GUN Series of rifles. These handy and quality rifles
have been a tremendous success with shooters all over the
world. We offer the Guide Gun Owner a special set of
SKINNER SIGHTS that includes a "RAMPED FRONT" that is
.070" wide. This special front sight reduces snagging in the
scabbard and brush, is wide enough to see quickly yet narrow
enough to not obscure the target. Our Guide Front Sight is nicely
serrated on the back to reduce glare.
$85 in Blued Steel $92 in Stainless Steel
PLEASE ORDER ALL SIGHTS ON THIS PAGE VIA THE
"ADD TO CART" BUTTON NEAR THE TOP.
THE SKINNER "EXPRESS" SIGHT
--- CLICK HERE ---
The SKINNER EXPRESS SIGHT blends the lines and beauty
of this Classic Rifle. This sight sits .062" lower than our standard
336 / 1895 sight allowing the use of a lower front sight
than our standard receiver sight.
Elegant and functional this sight fits all 336 / 1895 style receivers.
BLUE $95 ~ BRASS $100 ~ STAINLESS $105
(While this sight looks amazing on ALL large frame Marlins, it is
exceptionally attractive on the Octagon Barreled Cowboy)
ALSO AVAILABLE FOR THE MARLIN 1894 !!!
--- CLICK HERE ---
The SKINNER "ALASKAN"
(Shown here in Skinner "GOLD")
AS RUGGED AS THE MEN AND AS BEAUTIFUL AS THE WOMEN WHO LIVE THERE.....
The Skinner "ALASKAN" offers 1/2" more sight radius, bringing the aperture/peep even closer to your eye for a more clear field of view.
This sight covers the full length of the 1895 or 336 (or any of the large frame Marlins) receiver flat, blending the lines even further than the beautiful EXPRESS Sight.
The photos are worth a 1000 words....
Like all our Skinner Sights, the ALASKAN is fully windage
and elevation adjustable and uses any of our
5 APERTURES
(Shipped with a .096" installed)
(Shown in Stainless)
AVAILABLE IN: Skinner "BLACK GOLD" ~ $135
Skinner "GOLD" ~ $135
"STAINLESS" ~ $135
" ALL BLUE/BLACK" ~ $125
Skinner Sights in "BLACK GOLD"
For a touch of "Class" and just a bit of
extra "BLING" consider adding
"BLACK GOLD"
to any of our Windage Adjustable sights.
Order this option from our SPECIAL ITEMS page.
If you remove the factory barrel
mounted dovetail rear sight,
use this dovetail filler blank for a
great "finished" look!
See our SPECIAL ITEMS page.
Available in BLUE and STAINLESS to match the finish of your rifle.
1895 Full Length Rail
With INTEGRAL PEEP
This 13" Scout Rifle type length, the SKINNER 1895 Full Length Rail fits the bill for those who like options. Machined from a solid block of Aluminum and finished with a black anodizing.
THIS RAIL FITS THE NEW 1895 MARLINS BUILT BY RUGER
(I have mounted these on some earlier built Marlins but the dovetail spacing varies in positioning. We do not promise (or warranty) the spacing will be correct for pre RUGER built rifles.)
Featuring the Skinner Minimalist Peep Sight in the rear of the rail
Peep Sight Machined from Solid Steel Barstock, Ships with one .096" aperture installed
(Accepts any of our 5 different size apertures)
This peep is fully adjustable for windage and elevation. Locks down tight with ZERO wiggle or play and is rugged as the rifle itself.
Peep height above receiver is the same as our EXPRESS and ALASKAN sights
This sight utilizes all four receiver screw holes and the forward barrel dovetail slot for mounting. A steel dovetail blank with robust 8-40 screw hole fits into the barrel slot and is invisible once the rail is mounted. This gives a very sleek and trim look to the rail.
Dovetail blank may need very slight fitting. Generally, no gunsmithing is required.
THE Mini SHOT Reflex RED DOT Sight
~ CLICK HERE ~
ADJUSTING THE SKINNER SIGHT
Windage adjustment is accomplished by sliding the dovetail piece left or right in its slot.
The fit is tight, so you may need a BRASS PUNCH to move it. Once adjusted, it is locked in place with the set screw on top of the sight in front of the peep.
When adjusting, move the rear sight in the direction you want to bullet impact to move.
Elevation adjustment is accomplished by turning the peep on its threaded shaft to raise or lower the aperture. One half turn will move the point of impact about 2 inches at 100 yards, depending on your sight radius. The aperture can be threaded into the peep stem from either side. Once adjusted, the peep stem is locked in place using the set screw on the side of the dovetail piece.
To install the 1895 or 336 sight it is necessary to remove the dovetail piece to tighten the mounting screw under the dovetail.
Caution is required to avoid injury when the dovetail piece is removed. The corners of the dovetail slot are sharp. Use a BRASS PUNCH wooden dowel, or plastic punch to remove the dovetail.
This sight measures .480" from the top of the receiver to the center of the aperture.
Feel free to CONTACT ME with any questions!
